Bathtub Issues to Keep an Eye for and Avoid 

After a long, stressful day, nothing beats relaxing in a warm, long bath. With a nice book, a glass of champagne, and your favorite essential oils, this is the ideal way to relax your senses, renew your skin, and find the peacefulness you’ve been seeking. If your bathtub is in poor condition, it may appear difficult to unwind and enjoy yourself while bathing. The good news is that professional bathtub resurfacing can effortlessly elevate your old tub. 

The greatest part about having your bathtub refinished is that you may have a brand-new tub for a discounted rate of remodeling, restoration, or replacement. However, if they use ineffective techniques and low-quality materials, problems may occur.  The following are some of the most typical bathtub reglazing issues to watch out for and prevent: 

Bubbling 

When the air becomes trapped between particular layers of coating, it can cause bubbling. It could also occur if the coating failed to cure correctly or if the old finishing was not removed before resurfacing. 

Feeling sticky 

When the coating does not cure properly, a newly completed bathtub can feel sticky to the touch. If this happens, don’t use the tub just yet; you might have it sprayed again by the experts. 

Fading 

When the refinish coating is blended and applied too thinly, or if the wrong mixture is utilized, your reglazed bathtub may fade. Your tub’s original surface will ultimately peek through. 

Peeling 

If there is a chip on the surface of your reglazed bathtub, it may peel, leading to the breaking of the overall finish. This can also happen if the surface was not adequately prepped or if the glaze was not fully cured. 

Chipping 

This frequently occurs when you drop a heavy item into the tub by accident. To fix this, you can either use a mixing solvent or hire a professional tub refinishing firm. 

What Can You Do to Prevent Your Reglazed Bathtub from Being Damaged? 

Choose only the top bathtub refinishing business in your area to ensure excellent workmanship and client happiness. For everyone’s safety, make sure they cover your whole bathroom and make the place well-ventilated before beginning the project. 

After that, the refinishers should remove and sand down the old finish on your bathtub. They must then prepare a good foundation for the new finish by fixing and treating any flaws or imperfections on your tub’s surface, such as cracks, rust, or chips. They must then prime, reglaze, and seal the surface. Allow enough drying time for each coat to properly set and cure all materials. If all of these measures are followed, you can keep your freshly glazed tub for up to 10-15 years. 

Conclusion 

Relax and enjoy a relaxing bath in a newly reglazed bathtub. You may have a bathtub that is fresh and new without breaking the bank with the help of a bathtub reglazing professional. It’s best to contact the experts to have this completed since bathtub reglazing is not a DIY endeavor.  

Leave a Reply

Your email address will not be published.